• Corrosion resistant
• Easy-to-clean Reliability Dirt tolerant, max. sieve (strainer) width 200 μm or better
• High temperature-resistant
• Robust design prevents leakage
• High coil density IP67 (NEMA 4X)
• Compact design

Versions

The valve housing, blocks and manifolds are made of stainless steel AISI 304 (W.No. 1.4301), and the piston of stainless steel AISI 316 (W.No. 1.4401). Standard valves are delivered with PTFE piston and FPM sealings.

VDHT inline valves are available with a number of mounting possibilities, flow direction, port size: ¼, 3/8, ½, ¾ and 1” NPT and more – defining the following designation. The VDHT valves are also available in BSP.

VDHT integrated valve blocks provide a space and cost-saving solution in applications where valves are placed next to each other. Furthermore, integrated valves blocks provide a pressure loss reduction.

La entrada SOLENOID OPERATED VALVES se publicó primero en Loudtec.

• Zero risk of lubricant contamination:

–   Oil lubricants are replaced with the pumped medium, water, so there is no contamination risk from the pump.

• Low maintenance costs:

–   Efficient design and all stainless-steel construction ensure exceptionally long lifetime. When Danfoss specifications are met, service intervals of up to 8,000 hours can be expected. Service is easy, and can be carried out on site due to the simple design and few parts.

• Low energy costs:

–   The highly efficient axial piston design provides the lowest energy consumption of any comparable pump on the market.

• Easy installation:

The lightest and most compact design available. Pump can be installed horizontally or vertically. No pulsation dampeners necessary due to extremely low-pressure pulsation. Powered by electric motors or combustion engines. Suitable for both boosted inlet pressure and water supply from a tank. No need for cooling circuits due to very high mechanical efficiency.

• Certified quality:

Certificates: ISO 9001, ISO 14001, ITF 16949 ATEX available on request ABS and DNV GL certifications on   request.

Application examples

• High-pressure cleaning as used in the manufacturing of flat-panel displays and many other electronic products.
• High-pressure cleaning as used in the manufacturing of parts for the automobile industry.
• Reduction of NOx emissions in diesel engines and gas turbines. • Gas turbine by inlet fogging and fuel wash systems.

La entrada PUMPS FOR DI WATER WITH ADDITIVES se publicó primero en Loudtec.

• Zero risk of lubricant contamination:

–   Oil lubricants are replaced with the pumped medium, water, so there is no contamination risk from the pump.

• Low maintenance costs:

–   Efficient design and all stainless-steel construction ensure exceptionally long lifetime. When Danfoss specifications are met, service intervals of up to 8,000 hours can be expected. Service is easy, and can be carried out on site due to the simple design and few parts.

• Low energy costs:

–   The highly efficient axial piston design provides the lowest energy consumption of any comparable pump on the market.

• Easy installation:

The lightest and most compact design available. Pump can be installed horizontally or vertically. No pulsation dampeners necessary due to extremely low-pressure pulsation. Powered by electric motors or combustion engines. Suitable for both boosted inlet pressure and water supply from a tank. No need for cooling circuits due to very high mechanical efficiency.

• Certified quality:

Certificates: ISO 9001, ISO 14001, ITF 16949 ATEX available on request ABS and DNV GL certifications on   request.

Application examples

• High-pressure cleaning with ultra-pure water, as used in the manufacturing of f lat-panel displays and many other electronic products.
• High-pressure cleaning with ultra-pure water, as used in the manufacturing of parts for the automobile industry.
• Adiabatic cooling systems to replace or supplement standard A/C systems in server rooms and factories.
• Humidification in office buildings, electronic component manufacturing, dairies, greenhouses, etc.
• Dust suppression and odor control systems, for example in paper, textile and wood production.
• Reduction of NOx emissions in diesel engines and gas turbines. • Gas turbine by inlet fogging and fuel wash systems.
• Gas turbine by inlet fogging and fuel wash systems.

o de combustible en turbinas de gas.

La entrada PUMPS FOR GAS TURBINE APPLICATIONS se publicó primero en Loudtec.

• Zero risk of lubricant contamination:

–   Oil lubricants are replaced with the pumped medium, water, so there is no contamination risk from the pump.

• Low maintenance costs:

–   Efficient design and all-stainless steel construction ensure exceptionally long lifetime. When Danfoss specifications are met, service intervals of up to 8,000 hours can be expected. Service is easy, and can be carried out on site due to the simple design and few parts.

• Low energy costs:

–   The highly efficient axial piston design provides the lowest energy consumption of any comparable pump on the market.

• Easy installation:

The lightest and most compact design available. Pump can be installed horizontally or vertically. No pulsation dampeners necessary due to extremely low-pressure pulsation. Powered by electric motors or combustion engines. Suitable for both boosted inlet pressure and water supply from a tank. No need for cooling circuits due to very high mechanical efficiency.

• Certified quality:

Certificates: ISO 9001, ISO 14001, ITF 16949 ATEX available on request ABS and DNV GL certifications on   request.

Application examples

• High-pressure cleaning with ultra-pure water, as used in the manufacturing of f lat-panel displays and many other electronic products.
• High-pressure cleaning with ultra-pure water, as used in the manufacturing of parts for the automobile industry.
• Adiabatic cooling systems to replace or supplement standard A/C systems in server rooms and factories.
• Humidification in office buildings, electronic component manufacturing, dairies, greenhouses, etc.
• Dust suppression and odor control systems, for example in paper, textile and wood production.
• Reduction of NOx emissions in diesel engines and gas turbines. • Gas turbine by inlet fogging and fuel wash systems.

La entrada PUMPS FOR DI WATER se publicó primero en Loudtec.

• Zero risk of lubricant contamination:

–   Oil lubricants are replaced with the pumped medium, water, so there is no contamination risk from the pump.

• Low maintenance costs:

–   Efficient design and all stainless-steel construction ensure exceptionally long lifetime. When Danfoss specifications are met, service intervals of up to 8,000 hours can be expected. Service is easy, and can be carried out on site due to the simple design and few parts.

• Low energy costs:

–   The highly efficient axial piston design provides the lowest energy consumption of any comparable pump on the market.

• Easy installation:

The lightest and most compact design available. Pump can be installed horizontally or vertically. No pulsation dampeners necessary due to extremely low-pressure pulsation. Powered by electric motors or combustion engines. Suitable for both boosted inlet pressure and water supply from a tank. No need for cooling circuits due to very high mechanical efficiency.

• Certified quality:

Certificates: ISO 9001, ISO 14001, ITF 16949 ATEX available on request ABS and DNV GL certifications on request.

La entrada PUMPS FOR TAP WATER se publicó primero en Loudtec.

• Smooth running within a large operating parameters.
• Constant torque over a wide speed range.
• High starting torque
• Long life under severe operating conditions.
• Compact design.
• For use in both open and closed systems.
• Quiet in operation.
• Few wear parts and low maintenance costs.
• No oil lubrication.
• Non-corroding materials.
• Easy-to-clean design

Application examples

• Food industry
• Mining equipment
• Humid and wet environments
• Pharmaceutical industry
• Chemical industry
• Water treatment
• Nuclear industry

La entrada MAH 6.3 – MAH 12.5 se publicó primero en Loudtec.